How do I connect Brave 4 Pro WiFi with the smartphone?

Before You Start

• Download and install the AKASO GO app from the App Store (iOS) or Google Play (Android). Or you can download the APP from here: https://akasotech.com/downloads
• Ensure your camera’s battery is sufficiently charged.

This guide will walk you through the steps to connect your AKASO Brave 4 Pro camera to your smartphone using the AKASO GO app for remote control, live preview, and file transfer.

Here is the video you can refer to connect:

Important Note: For a successful connection, please allow the AKASO GO app to access your Location (GPS) and Local Network when prompted by your phone. This is a common requirement for apps that communicate with wireless devices.

Step-by-Step Connection Guide

1. Turn on Wi-Fi on Your Brave 4 Pro

• Power on your camera.
• Tap the Mode icon at the bottom of the touch screen.
• Tap the Wi-Fi icon to turn on Wi-Fi.
• The camera screen will display the Wi-Fi SSID (network name) and password. The default password is 1234567890.

2. Connect Your Smartphone to the Camera’s Wi-Fi

• Open your phone’s Settings and go to the Wi-Fi menu.
• Find the Wi-Fi network named AKASO-Brave4Pro-XX-XXXX in the list and tap it.
• Enter the password 1234567890 when prompted.
• Note: A “No Internet Connection” or “Weak Security” warning may appear. This is normal because the camera’s Wi-Fi replaces your phone’s internet connection. You can ignore this warning and proceed.

3. Connect in the AKASO GO App

• Open the AKASO GO app on your smartphone.
• Tap Device → Add Device.
• Select Brave 4 Pro from the list.
• Check the box that says “The above operation has been confirmed” and tap Live Preview.

Your camera is now connected to the AKASO GO App.

Using the App

Once connected, you can:

• Live Preview: See what your camera sees in real time.
• Control Shooting: Take photos or start/stop video recording remotely.
• Adjust Settings: Change resolution, mode, and other camera settings.
• View and Download: Access your camera’s media and save files directly to your phone.

Turning Off Wi-Fi

To disconnect and turn off Wi-Fi:

• On the camera, tap the X icon on the Wi-Fi screen, or press the OK/Shutter button.

Troubleshooting Tips

• Cannot find the Wi-Fi network? Make sure the Wi-Fi icon is displayed on your camera’s screen. If not, repeat Step 1.
• App fails to connect? Confirm your phone is connected to the camera’s Wi-Fi network and not a different network.
• Unable to download photos/videos to iPhone? Go to your phone’s Settings → Privacy → Photos, find AKASO GO, and select All Photos.
• Do not interrupt the download process: Avoid altering Wi-Fi settings or closing the app while transferring files.

For further assistance, contact AKASO customer support at cs@akasotech.com.