How to install/remove the SD card of Brave 4 Pro?

Your Brave 4 Pro uses a microSD card to store photos and videos. Follow these instructions to correctly insert or remove the memory card.

Supported Memory Cards

• Use a microSD, microSDHC, or microSDXC card.
• A UHS‑I / Class 10 or higher card is recommended for smooth recording, especially for 4K video.
• Maximum supported capacity: up to 256GB (or as specified by the manufacturer).

Installing the microSD Card

1. Turn off the camera.
Make sure the camera is powered off before installing or removing the card to avoid data corruption.

2 Insert the microSD card.
Hold the card with the metal contacts facing the front of the camera (the lens side). Gently push the card into the slot until you hear a click and it is fully seated.

Removing the microSD Card

1. Turn off the camera.
Always power down before removing the card.

2. Eject the card.
Gently press the card inward until it clicks and pops out slightly. Pull the card out of the slot.

Important Tips

• Format the card before first use. Go to System Settings → Format to prepare the card for use with the camera.
• Regularly reformat the card to maintain good performance (back up your files first).
• Do not remove the card while the camera is recording or transferring data, as this may damage files or the card.
• If the card is not recognized, try reformatting it or check that it is a supported type.

For further assistance, please contact AKASO customer support at cs@akasotech.com.