What modes does EK7000 support?

EK7000 camera includes Video, Photo, Burst Photo, Time Lapse, and Setting 5 modes.

• Video Mode
  Video Mode is the default mode when you turn on the camera.
  In Video Mode, press the Shutter button, and the camera starts recording Videos. To stop recording Videos, press the Shutter button again.
• Photo Mode
  Press the Mode button once to switch to Photo Mode. In Photo Mode, press the Shutter button to start taking photos.
• Burst Photo Mode
  Press the Mode button several times to switch to Burst Photo Mode. In Burst Photo Mode, press the Shutter button, and the camera takes 3 photos per second.
• Time Lapse Photo Mode
  Press the Mode button several times to switch to Time Lapse Photo Mode.
  In Time Lapse Photo Mode, press the Shutter button, and the camera takes a series of photos at specific intervals of 3s, 5s, and 10s.
• Setting Mode
  Press the Mode Button several times to switch to Setting mode. Press the UP or Down button to cycle through options and press the Shutter Button to select your desired option.

What parameters can be adjusted when shooting?

1. Video Resolution
   1080P60FPS / 1080P30FPS / 4K30FPS / 2.7K30FPS / 1080P60FPS / 720P120FPS / 720P60FPS (Default setting is 1080P60FPS)
2. Loop Recording
   Off / On (Default setting is Off)
   In this mode, the camera records a 10-minute video. When the memory card is full, old files will be overwritten by new ones.
   Note: When Loop Recording is enabled, the camera does not record 4K and 2.7K videos.
3. Time Stamp
   Off / Date / Date & Time (Default setting is Date & Time)
   If you turn on Time Stamp, this camera adds the time stamp to the videos or photos you take. If you select Off, the time stamp will not be added to videos or photos you take.
4. Exposure
   -2.0 / -1.7 / -1.3 / -1.0 / -0.7 / -0.3 / 0.0 / +0.3 / +0.7 / +1.0 / +1.3 / +1.7 / +2.0
   (Default setting is 0.0)
5. Photo Resolution
   20MP / 16MP / 14MP / 12MP / 8MP / 5MP / 4MP (Default setting is 20MP)
6. Burst Photo
   3 Photos
   In Burst Photo mode, the camera captures up to 3 photos in 1 second, so it is perfect for capturing fast-moving activities.
7. Self-timer
   2s / 3s / 5s / 10s / 20s / 30s / 60s (Default setting is 5s)
   A Self Timer gives a delay between pressing the shutter release and the shutter's firing. It is most commonly used to let the photographer take a selfie at specific intervals.
8. Time Lapse Photo
   Off / On (Default setting is Off)
   Time Lapse Photo captures a series of photos at specified intervals. Use this mode to capture photos of any activity, then choose the best one later.
   Note: When Time Lapse Photo is enabled, the camera will capture photos at specific intervals that are applicable to Self-timers.
9. Power Frequency
   50Hz / 60Hz / Auto (Default setting is 60Hz)
10. Microphone
    Built-in / External (Default setting is Built-in)
    You can choose between the internal and external microphones.
    Note: The external microphone is not included. You need to purchase it separately.

What is the file format of the videos/photos taken by EK7000?

The format is MOV/JPG.

Questions? Click to email us: cs@akasotech.com