The AKASO V50 Elite action camera supports microSD cards with a capacity of up to 64 GB. When choosing an SD card for your V50 Elite, it's important to consider the following requirements and recommendations:
1. Card Format: The SD card should be formatted using the FAT32 file system.FAT32 format microSD card stops recording when the storage of each file is over 4GB and starts to record again on a new file.
2. Card Speed: The SD card should have a minimum write speed of U3 rating, and UHS-I (Ultra High-Speed Class 1) to ensure smooth recording and playback of high-quality video and photos.
3. Card Brand: AKASO recommends using branded microSD cards from reputable manufacturers such as SanDisk, Samsung, or Kingston to ensure compatibility and reliability.
4. Card Storage: The SD card should have enough storage capacity to fit all your footage while leaving some extra space for future recordings. Keep in mind that higher resolutions and frame rates will require more storage space.
5. Card Care: Proper handling and care of the SD card are essential to prevent data loss or corruption. Avoid exposing the card to extreme temperatures, moisture, dust, or magnetic fields, and always eject the card safely before removing it from the camera or computer.
By following these requirements and recommendations, you can ensure optimal performance and longevity of your SD card and V50 Elite camera.
A guide to speed classes for SD and microSD Cards
The SD Association came up with a way to standardize the speed ratings for memory cards. They are known as Speed Classes and refer to the absolute minimum sustained write speed for both SD and microSD cards. There are three types of speed class:
- Speed Class
- UHS Speed Class
- Video Speed Class
| Speed Class | UHS Speed Class | Video Speed Class |
|---|---|---|
 |
 |
 |
| "Speed Class" Mark | "UHS Speed Class" Mark | "Video Speed Class" Mark 
|
Numbers with a circular “C” symbol, “U” symbol or a “V” symbol next to or around them indicate the speed classes of the memory card. Manufacturers use these speed class symbols to indicate the type of speed class and rating on the memory card. They are intended to help consumers choose the right memory card for their hardware devices in terms of speed.
Speed class
The very first speed class is simply known as the original Speed Class and is denoted with a “C” symbol. There are four ratings within the Speed Class:
- C2 (Class 2): minimum write speed of 2MB/s
- C4 (Class 4): minimum write speed of 4MB/s
- C6 (Class 6): minimum write speed of 6MB/s
- C10 (Class 10): minimum write speed of 10MB/s
| Minimum sequential write speed | Speed Class | Corresponding video format | |||||
|---|---|---|---|---|---|---|---|
| Speed Class | UHS Speed Class |
Video Speed Class (new) |
8K video | 4K video | Full HD / HD video |
Standard Video |
|
| Card image | |
|
|
The necessary speed varies by each recording/playback device condition, even in the same format. | |||
| 90MB/sec | |
√ |
|||||
| 60MB/sec |  |
√ | √ | ||||
| 30MB/sec |  |
√ | √ | √ | |||
| 10MB/sec |  |
√ | √ | √ | |||
| 6MB/sec |  |
√ | √ | √ | |||
| 4MB/sec | √ | √ | |||||
| 2MB/sec | √ | ||||||
C2 is the slowest speed class while C10 is the industry standard. Since newer hardware devices require newer speed classes with higher speeds and capabilities, hardly anyone uses Class 2–6 nowadays. C10 is usually the minimum speed class requirement for most hardware devices made today and is the most shipped memory card on the market.
UHS Speed Class
The next speed class up is the UHS (Ultra-High Speed) Speed Class and it’s denoted with the “U” symbol. There are two ratings within the UHS Speed Class:
- U1 (UHS Speed Class 1): minimum write speed of 10MB/s
- U3 (UHS Speed Class 3): minimum write speed of 30MB/s
The UHS Speed Class is more commonly used nowadays than the Speed Class and many high-end cameras require at least a U3-rated memory card for many of its functions, such as recording high-resolution videos. The UHS Speed Class mainly refers to the minimum sustained write performance for recording videos and came about due to 4K-capable video recording devices needing faster write speeds. As a rule of thumb, 4K-capable recording cameras will usually require at least a U3-rated SD card.
What makes the U1 and U3 memory cards more advanced than those in the Speed Class are that they use one of two UHS bus interfaces:
- UHS-I: theoretical maximum transfer speeds up to 104MB/s
- UHS-II: theoretical maximum transfer speeds up to 312MB/s
Both U1 and U3 memory cards can utilise the UHS-I bus interface, but are not compatible with the UHS-II bus interface.
These UHS bus interfaces indicate the theoretical maximum read and write speeds, unlike the sustained write speeds of speed classes. The UHS bus interfaces are denoted by a Roman numeral “I” or “II” symbol on the front of the card. The bus speeds refer to the theoretical data transfer rate of the interface itself while a U3-rated SD card has its own sustained write speed of 30MB/s. For example, a UHS-I U3-rated card guarantees a write speed of 30MB/s but has the potential for a read and write speed of up to 104MB/s if used with a device that supports a UHS-I bus interface.
A UHS-II compatible card has a potential read and write speed of up to 312MB/s. The UHS bus interfaces are backwards compatible so you can use a UHS-II card in a device that supports UHS-I, but you won’t see the speed benefits of UHS-II as the card will default back to the lower specs of UHS-I. Both the card and bus interface must be fully compatible to experience the speed benefits.
Video Speed Class
The latest Video Speed Class was created to enable higher video resolution and recording features, such as multiple video streams, 360-degree capture, VR content, and 4K- or 8K-resolution videos. They’re usually denoted with the “V” symbol. There are five ratings for the Video Speed Class:
- V6 (Video Speed Class 6): minimum write speed of 6MB/s
- V10 (Video Speed Class 10): minimum write speed of 10MB/s
- V30 (Video Speed Class 30): minimum write speed of 30MB/s
- V60 (Video Speed Class 60): minimum write speed of 60MB/s
- V90 (Video Speed Class 90): minimum write speed of 90MB/s
The Video Speed Class is unique because it’s capable of utilizing both the UHS-I and UHS-II bus interfaces. V6 to V90 speed class memory cards can use the UHS-II bus interface, but the UHS-I bus interface can only support V6 to V30 speed class memory cards.
The Video Speed Class offers the fastest speeds available and is ideal for ultra-high-resolution videos, high-quality videos and multi-file recording in drones and 360-degree cameras. It supports HD formats up to 8K video in drones, 360-degree cameras, action cams and VR cameras.
You can find the best card for your hardware device by choosing the same speed class or higher than the one required for your device. For example, if your device requires a Class 4 memory card, you can use Speed Class 4, 6, or 10. If your device requires a UHS Speed Class 1 card, you can use UHS Speed Class 1 or 3. The same functionality applies to the Video Speed Class as well. Note, that using a higher-rated card that goes beyond the speed class requirement for a device will still work, but you won’t be experiencing the full benefits of the higher speed class since the device only supports the lower speed class.
Comments
0 comments
Please sign in to leave a comment.