How to Connect Your AKASO Brave 7 to the AKASO GO App

The AKASO GO App lets you remotely control your Brave 7 action camera from your smartphone. You can preview shots, adjust settings, and transfer videos and photos directly to your phone.

Before You Start

• Download and install the AKASO GO app from the App Store (iOS) or Google Play (Android). Or you can download the APP from here: https://akasotech.com/downloads
• Ensure your camera’s battery has sufficient charge.

Here is a help center article on how to connect your Brave 7 to your smartphone via Wi-Fi, based on the user manual.

Step-by-Step Connection Guide

1. Turn on Wi-Fi on Your Brave 7

• Power on your camera.
• On the preview screen, swipe down to open the quick menu.
• Tap the Wi-Fi icon to turn on Wi-Fi.
• The camera will enter Wi-Fi mode and display the Wi-Fi SSID (network name) and password. The default password is 1234567890.

2. Connect Your Smartphone to the Camera’s Wi-Fi

• Open your phone’s Settings and go to the Wi-Fi menu.
• Find the Wi-Fi network with the SSID displayed on your camera (e.g., AKASO-Brave7-XXXX) and tap it.
• Enter the password 1234567890 when prompted.
• Note: A “No Internet Connection” or “Weak Security” warning may appear. This is normal because the camera’s Wi-Fi replaces your phone’s internet connection. You can ignore this warning and proceed.

3. Connect in the AKASO GO App

• Open the AKASO GO app on your smartphone.
• Tap Device at the bottom, then tap Add Device in the upper left corner.
• Select Brave 7 from the list.
• Tick “The above operation has been confirmed” and tap Live Preview.

Your camera is now connected to the AKASO GO App.

Using the App

Once connected, you can:

• Live Preview: See what your camera sees in real time.
• Control Shooting: Start or stop video recording, take photos, and switch modes.
• Adjust Settings: Change resolution, enable image stabilization, and more.
• View and Download: Access your camera’s media and save files to your phone.
• Update Firmware: Receive and install the latest firmware updates.

Turning Off Wi-Fi

To turn off Wi-Fi:

• Swipe down to open the quick menu and tap the Wi-Fi icon again, or simply press the Up button to exit the Wi-Fi screen.

Note: If Wi-Fi is activated but not connected to the app within 3 minutes, it will automatically disable. Re-activate Wi-Fi to reconnect.

Troubleshooting Tips

• Cannot find the Wi-Fi network? Make sure the Wi-Fi icon is displayed on your camera’s screen. If not, repeat Step 1. Tap “Research” in the app if the network does not appear.
• App fails to connect? Confirm your phone is connected to the camera’s Wi-Fi network and not another network.
• Unable to download photos/videos to iPhone? Go to your phone’s Settings → Privacy → Photos, find AKASO GO, and select All Photos.
• Do not interrupt the download process: Avoid altering Wi-Fi settings or closing the app while transferring files.

For further assistance, contact AKASO customer support at cs@akasotech.com.