AKASO 360 Battery & Power Management Guide

Battery & Charging
1. How many batteries are included?

• Standard Kit: 2 batteries
• Creator Combo: 3 batteries

Charger Specifications (Only Creator Combo have the charge case )

• Input: DC 5V
• Full charge time: ≈100 minutes (reference only)
• Charging Hub supports simultaneous charging for up to 3 batteries.
• Connect the hub to a power source via USB-C cable.
• Indicator during charging:
• Flashing green: Charging in progress
• Solid green: Fully charged
• Tip: Check battery level even when the hub isn’t connected to power.

Battery Level Indicators

Important Notes:

• The hub features overheat protection. Charging pauses automatically if batteries overheat (indicator turns solid red). Resumes when batteries cool.
• Avoid inserting hot batteries immediately after prolonged use. High temperatures may trigger protection mode, causing charging failure.

2. Battery Capacity & Endurance

3. Full Charge Time

• ≈100 minutes using a 5V/3A power adapter.

4. Endurance by Resolution (Reference Only)

Maximizing Battery Life

1. Fully charge the battery before first use.
2. Enable screen saver or use lower resolution/frame rate.
3. Charge batteries fully before storage.
4. Replace batteries annually for optimal performance.
   Power-Saving Tips:

• Enable Auto Power Off and Quick Capture.
• Use an external USB power source during operation.

Safety & Handling

Precautions:
⚠️ Use only AKASO-brand batteries and cables.
⚠️ High-resolution/frame-rate recording in warm environments increases power consumption and heat.
⚠️ Unstable network connections (via AKASO app) may cause overheating and faster drain.
⚠️ If the camera overheats:

• Let it cool before use.
• Record at lower resolutions/frame rates.
• Use power-saving features.

Storage Guidelines:

1. Maintain 50-60% charge for long-term storage. Recharge every 3 months; discharge every 6 months.
2. Never store with metal objects (coins, keys, etc.) to prevent short circuits/fire.
3. Keep in a dry place. Avoid physical damage from crushing/impact.
4. Avoid extreme temperatures:

• High heat (e.g., direct sunlight) causes malfunction/reduced lifespan.
• Cold environments shorten battery life.

1. Keep away from strong static/magnetic fields (damages safety circuits).
2. Never dry with external heat sources (hair dryer, microwave). Liquid damage voids warranty.

Critical Warnings:
❌ STOP USE immediately if the battery:

• Emits odor, overheats, discolors, deforms, or behaves abnormally.
• Remove from device/charger regardless of usage state.
  ❌ Isolate used terminals to prevent hazards.
  ❌ Never dispose in fire – risk of explosion.

Questions? Click to email us: cs@akasotech.com