Shamir

  • Total activity 336
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 1
  • Subscriptions 168

Activity overview

Latest activity by Shamir
  • Shamir created an article,

    My Brave 8 has a buzzing sound when playing back.

    If your Brave 8 action camera is making a buzzing sound when playing back recorded videos, it's possible that there is an issue with the camera's microphone or speaker. Here are some troubleshootin...

  • Shamir created an article,

    My Brave 7 8 has a sound issue.

    The sound volume in videos is too low. If the volume is too low while playing back the videos, please check the following steps:1) Did you record videos with the waterproof case?2) Did you turn on ...

  • Shamir created an article,

    What should do if the Brave 8 cannot be charged?

    Confirm if the wall charger, USB cable, and ports are functioning properly. Check if the wall charger is properly plugged in and receiving power. Inspect the USB cable for any visible damage or ...

  • Shamir created an article,

    Why does the Brave 8 keep showing SD card error?

    Please make sure that the SD card you are using is in accordance with the specifications of the user manual, please check this below link for the specifications of the SD card. What is the specific...

  • Shamir created an article,

    Brave 8 Turn Off Automatically

    why does my camera turn off automatically? The following are common reasons why the camera automatically shuts down: Camera will turn off  if you do not operate it【General Setting--Auto Power Of--...

  • Shamir created an article,

    Why is Brave 8 freezing?

    In most cases, the freezing problem is in relation to the quality of the memory card, firmware version, or the device itself.As a preliminary excluding method, we advise our users to get their SD C...

  • Shamir created an article,

    Brave 8 Will Not Power On

    The camera can not turn on If the camera cannot be turned on, please remove the battery & SD card, and plug the camera with a 5V2A adapter. Then press the “power” button for 3s to turn on the camer...

  • Shamir created an article,

    How to operate OTA upgrade

    Preparation: - Camera firmware with OTA upgrade capability- The latest AKASO GO application is installed- Functioning memory in the camera (micro SD card)- Sufficient free memory in the cell phone ...

  • Shamir created an article,

    How to connect to Remote Control with Brave 8?

    You can use the remote to control the camera to take photos, take videos, and stop videos.   Please confirm the remote battery is in full condition; Please follow the instructions to correctly ...

  • Shamir created an article,

    Does Brave 8 support HDMI?

    Brave 8 action camera does not have an HDMI port, so you can't connect it via an HDMI cable. Instead, the Brave 8 camera has a USB Type-C port, which can be used for both charging and data transfer...