What Photo modes does Brave 7 LE support?
There are 5 modes of this action camera: Single, Burst, TimeLapse, Self-Time, and Long Exposure.
- Single Photo
The default setting is Single Photo.
- Burst Photo: 3 shots/7 shots/15 shots/30 shots
The default setting is 3 shots.
In burst mode, several photographs are captured in quick succession, so it is perfect for capturing fast-moving activities.
- Time Lapse:3 Sec/5 Sec/10 Sec/30 Sec/1 Min
The default setting is 3 Sec.
Time Lapse Photo captures a series of photos at specified intervals. Use this mode to capture photos of any activity, then choose the best ones later.
- Time Lapse Duration: Unlimited/5 Min/10 Min/15 Min/20 Min/30 Min/60 Min
The default setting is Unlimited.
You can enable Time Lapse Duration to set the total duration of timelapse photos.
- Self-Time: Delay 2s/Delay 5s/Delay 10s
The default setting is Delay 2s.
Self-Time Mode gives a delay between pressing the shutter release and the shutter's firing.
- Long Exposure: 1 Sec/2 Sec/5 Sec/8 Sec/30 Sec/60 Sec
The default setting is 1 Sec.
Long exposure means using a long-duration shutter speed to sharply capture the stationary elements of images while blurring, smearing, or obscuring the moving elements.
What parameters can be adjusted in the Photo modes?
- Photo Resolution: 20MP/16MP/14MP/10MP/8MP/5MP/2MP
The default setting is 20MP.
- Image Quality: High/Middle/Low
The default setting is High.
- ISO: Auto/100/200/400/800/1600/3200
The default setting is Auto.
ISO determines the camera’s sensitivity to light and creates a trade-off between brightness and resulting image noise. Image noise refers to the degree of graininess in the image. In low light, higher ISO values result in brighter images, but with greater image noise. Lower values result in lower image noise, but darker images.
- EV: -2.0/-1.0/0.0/+1.0/+2.0
The default setting is 0.
By default, your camera uses the entire image to determine the appropriate exposure level. However, exposure lets you select an area that you want the camera to prioritize when determining exposure. This setting is particularly useful in shots where an important region might otherwise be over- or underexposed.
- Metering: Center/Multi
The default setting is Multi.
The metering mode refers to the way in which a camera determines the exposure.
- Date Stamp: Off/Date/Date&Time
The default setting is Date&Time.
Turn on Date Stamp, this camera adds a date stamp to the videos and photos you take.