-
Please confirm the remote battery is in full condition;
-
The remote can be used up to 10 meters away in optimal conditions.
-
The remote is splashproof only, not waterproof.
How to use it?
(1) Turn on the remote by pressing the Power button. The red and blue indicators on the remote will be flashing quickly.
(2) Enable the Remote feature on the camera. To do this, go to the camera settings to turn on the remote control switch.
(3) Press and hold the remote’s mode and Shutter buttons till its screen displays the date. The two indicators will stop flashing.
(4) The remote is successfully connected to your camera.
Warm tip: The remote will be connected to the camera automatically in your second use.
Button Operation Instructions
You can press the Power button to turn the remote on or off. You can turn off both the remote and the camera by pressing and holding the Power button.
You can press the Shutter button to start /stop recording or start shooting.
You can press the Mode button to switch between the video or photo mode.
Indicators
Red and blue indicators flashing quickly: Pairing
Blue indicator flashing slowly: Recording
Blue indicator flashing once: Shooting
Red indicator staying on: Charging (It will be off when the remote is fully charged)
Comments
2 comments
Is the akaso brave 7 better than the 7LE? What are the differences?
I Have a Brave 7 with firmware Brave7-20210206-V1.0 (I bought this camera whe it was launched for the first time, around 2021)
I wanted to know if this remote control from the picture is compatible with Brave 7 with the firmware above. My camera has never updated to new firmware, eventhough I know there are newer cameras Brave 7 with newer firmware.
I have been trying to pair my camera to this new remote control, but I can't get them to pair.
Could this problem be incomptibility of firmware??
Please sign in to leave a comment.