Brave 7 Recording Mode Guide

What recording modes does Brave 7 support?

Video modes of this camera include Video, Slow Motion, Time Lapse,
Still Photo and Driving Mode

• Video
  Video Mode is the default mode when you turn on the camera.
  In Video Mode, press the Shutter button, and the camera starts recording a video. Press
  the Shutter button again to stop recording the video. Press the Up or Down button to
  adjust the zoom level.
  Note: The camera does not record sounds when it is in the waterproof case.
• Slow Motion
  In Slow Motion Video mode, press the Shutter button, and the camera records a slow
  motion video.
• Time Lapse
  In Time Lapse Video mode, press the Shutter button, and the camera records videos from
  frames captured at specific intervals. This allows the action to progress much
  faster than in reality.
  Note: Time Lapse Video is captured without audio.
• Still Photo
  In Still Photo mode, press the Shutter button, the camera records videos and takes
  still photos at specific intervals.
• Driving Mode
  If you turn on Driving Mode and connect the camera to your car cigarette lighter, the
  camera will automatically turn on and record videos when you start your car. It will
  automatically turn off when the car engine is off.

What parameters can be adjusted in video mode?

1. Resolution: 4K30/2.7K30/1080P60/1080P30/720P120/720P60/720P30
   The default setting is 4K30.
   Note: When capturing video at high resolutions or high frame rates in warm ambient
   temperatures, the camera may become warm and use more power.
2. Image Stabilization: Off/On
   The default setting is Off.
   This setting adjusts the footage to offset motion during capture. The result is
   smoother footage, especially in activities with relatively small but fast motion
   including cycling, motorcycling, and handheld uses.
3. Video Encode: H.264/H.265
   The default setting is H.264.
   Video encoding is basically a process of converting a given video input into a digital
   format that is compatible with most types of Web players and mobile devices.
4. Loop Recording Time: Off/3 Min/5 Min/6 Min
   The default setting is Off.
   Loop recording allows your camera to overwrite old files with new files. Once the
   memory card becomes full, the camera will delete the first video file to make room
   for the latest file. For example, if the setting for loop recording is “1 Minute”, then the
   camera will create video clips of 1 minute in length, and a 1-minute clip will be
   deleted when the camera needs more memory.
5. Slow Motion: 1080P90/1080P60/720P120/720P60
   The default setting is 1080P90.
   Slow motion is an effect in film-making whereby time appears to be slowed down.
6. Time Lapse Interval: 0.2 Sec/0.3 Sec/0.5 Sec/1 Sec/2 Sec/5 Sec/10 Sec/30 Sec/1 Min
   The default setting is 0.5 Sec.
   Time-lapse interval is the time that passes between two shots in a time-lapse
   sequence.
7. Time Lapse Duration: Close/5 Min/10 Min/15 Min/20 Min/30 Min/60 Min
   The default setting is Close.
8. Still Photo: 4K30
   The default setting is 4K30.
9. Still Photo Time: 3 Sec/5 Sec/10 Sec/30 Sec
   The default setting is 3 Sec.
   The camera automatically takes photos at a specific time during video recording.
10. Audio Record: On/Off
    The default setting is On.

What is the resolution of videos captured by Brave 7?

Resolution: 4K30/2.7K30/1080P60/1080P30/720P120/720P60/720P30
The default setting is 4K30.
Note: When capturing video at high resolutions or high frame rates in warm ambient temperatures, the camera may become warm and use more power.

What is the file format of the video captured by Brave 7?

The format is MP4.